DAC Technologies GEN-X electronic flight bag P/N 1069-4000-01 User Manual download pdf (Page 15)

Equipment Installation Manual,

GEN-X Electronic Flight Bag

1069-2510-01 D.doc

1069-2510-01

Rev D

Page 15 of 27

Battery Checkout

The lithium ion battery installed in the Gen-X RPU is incased in a smart electronic package which

eliminates the risk of overcharging during temperature extremes as well as monitoring the age and

condition of the battery itself. When a condition exists that causes the battery to be incapable of

performing its intended function, the battery monitor light on the RPU is lit yellow. If during normal

inspection intervals this yellow light is observed, the battery should be replaced according to the section

“Battery Replacement”.

Equipment Checkout

The GEN-X Electronic Flight Bag is used to display user-selected software that may perform a variety of

tasks in the cockpit. Refer to the pilots guide or Aircraft maintenance manual for actual tests.

1. Apply power to both the battery buss circuit breaker and the essential buss breaker.

System will initiate.

2. Insure operation of dimming and screen on-off control.

3. Insure operation of EFB touch screen.

4. Perform the functional test of the GEN-X Electronic Flight Bag.

Note: FMS operation is not a functional requirement for operation.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 26 27

No comments

DAC Technologies GEN-X electronic flight bag P/N 1069-4000-01 User Manual Page 15